HP 8/40 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 327
fwAlarmsFilterSet, Synopsis, Description, Notes, Operands, Examples, See Also
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 327 highlights
fwAlarmsFilterSet 2 fwAlarmsFilterSet Synopsis Enables or disables alarms for Fabric Watch. fwalarmsfilterset [mode] Description Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all non-environment class alarms are suppressed. By turning on the alarms, all class alarms are generated. Notes This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operand: mode Specify 1 to enable the alarms, 0 to disable the alarms. If no operand is specified, the default value is 0 (alarms deactivated). This operand is optional. Examples To enable alarms in Fabric Watch: switch:admin> fwalarmsfilterset FW: Alarms are already disabled switch:admin> fwalarmsfilterset 1 FW: Alarms are already enabled See Also fwAlarmsFilterShow Fabric OS Command Reference 299 53-1001186-01