HP 8/40 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 236
fanShow
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
2 fanShow fanShow Displays fan status and speed. Synopsis fanshow Description Use this command to display the current status and speed of each fan in the system. Fan status is displayed as: OK Fan is functioning correctly. absent Fan is not present. below minimum Fan is present but rotating too slowly or stopped. above minimum Fan is rotating too quickly. unknown Unknown fan unit installed. faulty Fan has exceeded hardware tolerance and has stopped. In this case, the last known fan speed is displayed. The output from this command varies depending on switch type and number of fans present. Note This command is not available on non-bladed systems except for the Brocade 4100, 4900, and 5300. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To display information on the fans in the system: switch:admin> fanshow Fan #1 is OK, speed is 2721 RPM Fan #2 is OK, speed is 2657 RPM Fan #3 is OK, speed is 2700 RPM See Also chassisShow, fanDisable, fanEnable, psShow 208 Fabric OS Command Reference 53-1001186-01