HP 8/40 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 629
portLogClear, Synopsis, Description, Operands, Examples, See Also, portLogDump, portLogShow
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 629 highlights
portLogClear 2 portLogClear Clears the port log. Synopsis portlogclear Description Use this command to clear the port log. You might want to clear the port log before triggering an activity so that the log displays only the log events related to that activity. If the port log is disabled, portLogClear enables it. The port log is disabled automatically when certain errors occur to allow the collection of all the information needed to understand the cause of the error. When the port log is disabled, the events already present in the log are preserved, but new events are not collected. The following errors disable the port log: FCPH, EXCHBAD FCPH, EXCHFREE NBFSM, DUPEPORTSCN UCAST, RELICPDB Refer to the Fabric OS Message Reference for more information on these errors. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To clear the port log: switch:admin> portlogclear switch:admin> portlogshow port log is empty See Also portLogDump, portLogShow Fabric OS Command Reference 601 53-1001186-01