HP 8/40 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 437
iscsiSwCfg, Specifies the IQN prefix of the target name.
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 437 highlights
iscsiSwCfg 2 iscsiSwCfg Synopsis Displays or configures the iSCSI switch level configuration. iscsiswcfg --enableconn -s slot number | all iscsiswcfg --disableconn -s slot number | all iscsiswcfg --showconn -s slot number | all iscsiswcfg --modifygw -t target name iscsiswcfg --showgw Description Use this command to display the iSCSI switch level configuration and to configure the iSCSI connection redirection and target name prefix. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: --enableconn Enables the connection redirection on a specific slot or all slots. --disableconn Disables the connection redirection on a specific slot or all slots. --showconn Displays the configuration of the connection redirection. --modifygw Specifies the IQN prefix of the target name. --showgw Displays the target name prefix. Examples To enable the connection redirection on slot 3: switch:admin> iscsiswcfg --enableconn -s 3 The operation completed successfully. To disable the connection redirection on slot 3: switch:admin> iscsiswcfg --disableconn -s 3 The operation completed successfully. To display the connection redirection for iSCSI blades on the switch: switch:admin> iscsiswcfg --showconn -s all Number of records found: 1 Slot ICR Status 3 Disabled To display a target name prefix: switch:admin> iscsiswcfg --showgw Target name is: iqn.2002-12.com.brocade To change a target name prefix: switch:admin> iscsiswcfg --modifygw -t iqn.2002-10.com.brocade The operation completed successfully. See Also fosConfig, iscsiCfg, iscsiPortCfg Fabric OS Command Reference 409 53-1001186-01