HP 8/40 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009) - Page 500
Displays the partition configuration for all slots, regardless of the slot's status.
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 500 highlights
2 lsCfg -b | -base Turns an existing logical switch into a base switch. When this command is issued on a switch that is already a base switch, this command removes the base switch properties. This command disables the current logical switch. After making the change, you must re-enable the switch. -f | -force Executes the command without confirmation. This operand is optional. --show Displays the partition configuration on a chassis. Without any operands, the command displays all logical switches and the ports assigned to them. For each switch, the FID and switch role are displayed: base switch (BS) or default switch (DS). -provision Displays the partition configuration for all slots, regardless of the slot's status. This operand is optional and valid only on a chassis. --help Displays the command usage. Examples To create a base switch: switch:admin> lscfg --create 1 -base Creation of a base switch requires that the proposed new base switch on this system be disabled. Would you like to continue [y/n]?: y About to create switch with fid=1. Please wait... Switch successfully created. Logical Switch has been created with default configurations. Please configure the Logical Switch with appropriate switch and protocol settings before activating the Logical Switch. To create a logical switch identified by fabric ID 2: switch:admin> lscfg --create 2 About to create switch with fid=2. Please wait... Switch successfully created. Logical Switch has been created with default configurations. Please configure the Logical Switch with appropriate switch and protocol settings before activating the Logical Switch. To create a base switch with FID 2 without confirmation: switch:admin> lscfg --create 2 -base -force About to create switch with fid=2. Please wait... Switch successfully created. Logical Switch has been created with default configurations. Please configure the Logical Switch with appropriate switch and protocol settings before activating the Logical Switch. To delete a logical switch: switch:admin> lscfg --delete 2 All active login sessions for FID 2 have been terminated. Switch successfully deleted. 470 Fabric OS Command Reference 53-1001337-01