HP 8/40 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009) - Page 959
zoneAdd, zoneName, member, Using Fabric OS Commands, Command, Availability
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 959 highlights
zoneAdd 2 zoneAdd Synopsis Adds a member to the zone. zoneadd "zoneName", "member[; member]" Description Use this command to add one or more members to an existing zone. This command changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to become effective, enable the configuration with the cfgEnable command. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "zoneName" Specify the name of an existing zone. Double quotation marks are optional. "member" Specify a member or list of members to be added. The list must be enclosed in double quotation marks. Members must be separated by semicolons. Members can be specified in one or more of the following ways: • A switch domain and port index number pair; for example, "2, 20". Use switchShow for a listing of valid port index numbers. • Node or port WWN. • Zone alias name. Examples To add aliases for three disk arrays to "Blue_zone": sw5:admin> zoneadd "Blue_Zone", "array3; array4; array5" See Also zoneCreate, zoneDelete, zoneRemove, zoneShow Fabric OS Command Reference 929 53-1001337-01