HP 8/40 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009) - Page 918
trackChangesSet, snmptrapmode, Using Fabric OS commands, Command, Availability
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 918 highlights
2 trackChangesSet trackChangesSet Synopsis Enables or disables the track-changes feature. trackchangesset [mode][, snmptrapmode] Description This command enables or disables the track-changes feature. An SNMP-TRAP mode can also be enabled. Changes that can be tracked with this command include the following: • Successful login • Unsuccessful login • Logout • Config file change from task • Track-changes on • Track-changes off The output from the track-changes feature is dumped to the error log for the switch. Use errDump or errShow to view the error log. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: mode Specify 1 to enable the track-changes feature or 0 to disable the feature. The default (if no operand is specified) is to disable the track-changes feature. This operand is optional. snmptrapmode Specify 1 to enable errors to be sent to the SNMP-TRAP in addition to the errlog or specify 0 to disable the SNMP-TRAP messages. The default (if no operand is specified) is to disable SNMP-TRAP messages. This operand is optional. Examples To enable the track-changes feature: switch:admin> trackchangesset 1, 1 Committing configuration...done. switch:admin> trackchangesshow Track changes status: ON Track changes generate SNMP-TRAP: YES See Also snmpConfig, trackChangesHelp, trackChangesShow 888 Fabric OS Command Reference 53-1001337-01