HP 8/40 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009) - Page 954
Creating and managing RD Zones, router FCR. Specify
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 954 highlights
2 zone 3. Creating and managing RD Zones: --rdcreate Creates a RD Zone for the specified members. The following operands are required: host_wwn Specifies the port world wide name of the host. target_wwn Specifies the port world wide name of the target. vi_wwn Specifies the port world wide name of the virtual initiator (VI). vt_wwn Specifies the port world wide name of the virtual target (VT). policy restartable | nonrestartable Specifies the policy as either restartable or nonrestartable. A restartable policy causes traffic flow to revert to the physical host and target configuration in the event the virtual device should fail. When the policy is specified as nonrestricted and one of the virtual devices goes offline, the physical devices are considered offline and no traffic is allowed between the original host and target. FCR | noFCR --rddelete name Indicates whether or not this RD zone should function across a Fibre Channel router (FCR). Specify FCR to support FCR. Specify noFCR if you do not wish to support FCR. Deletes the RD Zone specified by name. RD Zones are unique in that the zone name is not user-defined. It is derived based on members and the specified configuration. Use cdfgShow to display currently implemented RD zone by name. Examples 1. Specific zone operation commands: The following example shows a scenario of an invalid configuration. If you attempt to create a zone z10 with an alias a10, then create a zone with name a10, z10 expects a10 to be an alias and results in an invalid configuration. To validate all zones in the currently enforced zone database: switch:admin>zonecreate z10,a10 switch:admin>zonecreate a10, 1,2 switch:admin> zone --validate Defined configuration: zone: a10 1,2* zone: z10 a10~ Effective configuration: No Effective configuration: (No Access Invalid configuration * - Member does not exist # - Invalid usage of broadcast zone The reason for not being in the current enforcement table could be one of the following: • The device is not online. • The device is online but is not Admin Domain-aware. • The device is online but it is not part of the current Admin Domain. 924 Fabric OS Command Reference 53-1001337-01