HP 8/40 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009) - Page 90
bladeDisable
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
2 bladeDisable bladeDisable Synopsis Disables all user ports on a blade. bladedisable slotnumber Description Use this command to disable all user ports on a blade. All Fibre Channel ports on the blade are taken offline. If the switch was connected to a fabric through this blade, the remaining switches reconfigure, and the switch reconfigures based on the other blade ports. As each port is disabled, the front panel LED changes to a slow flashing yellow. After issuing bladeDisable on a slot in a chassis, switchShow displays the user ports in the disabled state. The blade is still shown as enabled in both switchShow and slotShow output. The blade must be disabled before making configuration changes or before running many of the diagnostic tests. The blade does not need to be disabled before rebooting or powering off. You cannot disable a blade when the blade is faulted, powered off, or running diagnostics. This command disables the ports on a single blade. To disable the ports in an entire chassis, use the chassisDisable command. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operand: slotnumber Specifies the slot number for which the ports are to be disabled. Examples To disable a blade in slot 5: switch:admin> bladedisable Blade 2 is being disabled...Done To verify that the user ports on the blade are disabled: switch:admin> switchshow -slot 5 switchName: DCX57_9 switchType: 62.1 switchState: Online switchMode: Native switchRole: Subordinate switchDomain: 9 switchId: fffc09 switchWwn: 10:00:00:05:1e:40:4a:00 zoning: ON (all_cfg) switchBeacon: OFF FC Router: OFF FC Router BB Fabric ID: 128 Slot Blade Type ID Model Name Status 5 COREBLADE 52 CORE8 ENABLED Index Slot Port Address Media Speed State Proto 384 5 0 ------ cu 8G In_Sync FC Disabled 60 Fabric OS Command Reference 53-1001337-01