HP 8/40 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009) - Page 725
v6.3.0 release.
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 725 highlights
portShow 2 Parity_err: 0 2_parity_err: 0 CMI_bus_err: 0 Ols_in: 0 Ols_out: 2 Port part of other ADs: No To display an FCoE port: switch:admin> portshow 11/1 portName: portHealth: HEALTHY Authentication: None portDisableReason: None portCFlags: 0x1 portFlags: 0x2cb03 PRESENT ACTIVE F_PORT G_PORT U_PORT LOGICAL_ONLINE LOGIN NOELP LED NSREG ACCEPT FLOGI portType: 17.0 portState: 1 Online Protocol: FCoE portPhys: 6 In_Sync portScn: 32 F_Port port generation number: 0 portId: 036100 portIfId: 43b20029 portWwn: 20:61:00:05:1e:40:34:00 portWwn of device(s) connected: Distance: normal portSpeed: 10Gbps Function Syntax Port display commands supported on the Brocade 7800/FX8-24 and on the Brocade 7500/7500E/FR4-18i platforms portshow option [slot/]ge_port [optional_args] Description Use this command to display the local IP interfaces and static routes on the Brocade 7800/FX8-24 and on the Brocade 7500/7500E/FR4-18i platforms. The parameters displayed by this command are set with the portCfg command. The following displays are supported with this command: • portShow ipif - Displays the local IP interfaces • portShow iproute - Displays static routes on the IP interfaces • portShow arp - Displays content of the Address Resolution ARP table Note On the on the Brocade 7800/FX8-24 platforms IPv6 addresses are not supported in the Fabric OS v6.3.0 release. You can display the content of the ARP table on the Brocade Extension platform but you cannot modify this table with portCfg. Operands This command has the following operands: slot For bladed systems only, specifies the slot number of the port to be displayed, followed by a slash (/). Fabric OS Command Reference 695 53-1001337-01