HP 8/40 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01, July 2009) - Page 575
perfDelEEMonitor, Synopsis, Description, Notes, Operands, switchShow, perfMonitorShow, Examples
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 575 highlights
perfDelEEMonitor 2 perfDelEEMonitor Synopsis Deletes one or all end-to-end performance monitors from a port. perfdeleemonitor [slotnumber/]portnumber [monitorId] Description Use this command to delete an end-to-end performance monitor from a port, or all such monitors associated with a port. Notes This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port on which to delete the monitor, followed by a slash (/). portnumber Specifies the number of the port on which the monitor is to be deleted, relative to its slot for bladed systems. Use switchShow for a list of valid ports. monitorId Specifies the numeric key of the monitor to be deleted. The key is defined when a monitor is created. Use perfMonitorShow to determine the monitor key. This operand is optional. If no operand is specified, this command deletes all end-to-end monitors associated with the port. Examples To delete an end-to-end monitor on a port, or all such monitors: switch:admin> perfdeleemonitor 7/2 5 End-to-End monitor number 5 deleted switch:admin> perfdeleemonitor 7/2 This will remove ALL EE monitors on port 2, continue? (yes, y, no, n): [no] y See Also perfAddEEMonitor, perfMonitorShow Fabric OS Command Reference 545 53-1001337-01