HP AE370A HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March - Page 309
Correcting zoning setup issues, Table 68
UPC - 882780362611
View all HP AE370A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
3. Compare the fabricShow output from the two fabrics. Note the number of Domain ID conflicts; there may be several duplicate Domain IDs that must be changed. Determine which switches have domain overlap and change the Domain IDs for each of those switches. 4. Choose the fabric on which to change the duplicate Domain ID; connect to the conflicting switch in that fabric. 5. Enter the switchDisable command. 6. Enter the switchEnable command. This will enable the joining switch to obtain a new Domain ID as part of the process of coming online. The fabric principal switch will allocate the next available Domain ID to the new switch during this process. 7. Repeat step 4 through step 6 if additional switches have conflicting Domain IDs. Correcting zoning setup issues Table 68 lists the types of zone configuration discrepancies that can cause segmentation. Table 68 Types of zone discrepancies Conflict cause Description Configuration mismatch Occurs when zoning is enabled in both fabrics and the zone configurations that are enabled are different in each fabric. Type mismatch Occurs when the name of a zone object in one fabric is also used for a different type of zone object in the other fabric. A zone object is any device in a zone. Content mismatch Occurs when the definition in one fabric is different from the definition of a zone object with the same name in the other fabric. Table 69 summarizes commands that are useful for debugging zoning issues. Table 69 Commands for debugging zoning Command Function aliCreate Use to create a zone alias. aliDelete Use to delete a zone alias. cfgCreate Use to create a zone configuration. cfgShow Displays zoning configuration. cfgTransAbort Use to abort the current zoning transaction without committing it. cfgTransShow Use to display the ID of the current zoning transaction. defZone Sets the default zone access mode to No Access, initializes a zoning transaction (if one is not already in progress), and creates the reserved zoning objects. licenseShow Displays current license keys and associated (licensed) products. switchShow Displays currently enabled configuration and any E_Port segmentations due to zone conflicts. zoneAdd Use to add a member to an existing zone. zoneCreate Use to create a zone. Before a zone becomes active, the cfgSave and cfgEnable commands must be used. zoneHelp Displays help information for zone commands. zoneShow Displays zone information. Fabric OS 6.x administrator guide 311