HP Brocade 8/24c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 1051

22 thMonitor thMonitor SYNOPSIS Enables monitoring of small form-factor pluggables (SFPs). thmonitor --enable brcdsfp thmonitor --disable brcdsfp thmonitor --show DESCRIPTION Use this command to enable Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G QSFPs. Fabric Watch does not monitor 10G and 16G SFPs or 16G QSFPs unless monitoring is explicitly enabled with this command. NOTES This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. OPERANDS This command has the following operands: --enable brcdsfp Enables Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G QSFPs. The feature is by default disabled. --disable brcdsfp Disables Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G QSFPs. --show Displays the current configuration. --help Displays the command usage. EXAMPLES To enable Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G QSFPs. switch:admin> thmonitor --enable brcdsfp Brcd SFP Threshold Monitoring is enabled To display the configuration: switch:admin> thmonitor --show Brcd SFP Threshold Monitoring is enabled To disable Fabric Watch threshold monitoring for 10G and 16G FPs and for 16G QSFPs. switch:admin> thmonitor --disable brcdsfp Brcd SFP Threshold Monitoring is disabled SEE ALSO thConfig, sfpShow Fabric OS Command Reference 53-1001764-01 1017