HP Brocade 8/24c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 994

22 supportShowCfgDisable supportShowCfgDisable SYNOPSIS Disables a group of commands under the supportShow command. supportshowcfgdisable os | exception | port | fabric | services | security | network | portlog | system | extend | filter | perfmon | ficon | iswitch | asic_db | ag | dce_hsl | crypto | fcip DESCRIPTION NOTES OPERANDS Use this command to disable a group of commands under the supportShow command. Use the supportShowCfgEnable command to enable groups of commands. The FCIP commands are supported only on the Brocade 7800/FX8-24 and FR4-18i platforms and cannot be configured to collect data on unsupported platforms. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: os Disables the OS group commands. exception Disables the exception group commands. port Disables the port group commands. fabric Disables the fabric group commands. services Disables the service group commands. security Disables the security group commands. network Disables the network group commands. portlog Disables the portlog group commands. system Disables the system group commands. extend Disables the extend group commands. filter Disables the filter group commands. perfmon Disables the Performance Monitor group commands ficon Disables the FICON group commands. iswitch Disables the FC Router group commands. 960 Fabric OS Command Reference 53-1001764-01