HP Brocade 8/24c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 664

22 portCfgAutoDisable --add --remove --addall --removeall --addexcept --show option LOSN LOSNG OLS NOS LIP Specifies one or more trigger conditions that will disable the specified ports. Trigger conditions must be separated by a space, for example, LOSN OLS LIP. Trigger conditions are case insensitive. Removes one or more trigger conditions from the port autodisable configuration. Adds all supported trigger conditions to the port autodisable configuration. Removes all supported trigger conditions from the port autodisable configuration. This command removes the triggers only; it does not disable the port autodisable flag. Adds all supported trigger conditions to the port autodisable configuration except the one specified . Displays the port autodisable configuration. Specify one or more the following options (supported with the --add, --remove, and --addexcept operands): Loss of Sync Loss of Signal Offline Primitive Sequence Not Operational Primitive Sequence Loop Initialization Primitive Sequence EXAMPLES To disable the port autodisable feature on single port: switch:admin> portcfgautodisable --disable 18 switch:admin> portcfgautodisable --show 18 Port Auto Disable: OFF Configured Option(s):No events configured. Port will not be automatically disabled. To enable the port autodisable feature on a single port: switch:admin> portcfgautodisable --enable 18 switch:admin> portcfgautodisable --show 18 Port Auto Disable: ON Configured Option(s):No events configured. Port will not be automatically disabled. To add multiple trigger conditions to the port autodisable configuration on a single port: switch:admin> portcfgautodisable --add losn lip ols 18 switch:admin> portcfgautodisable --show 18 Port Auto Disable: ON Configured Option(s): LOSN OLS LIP 630 Fabric OS Command Reference 53-1001764-01