HP Brocade 8/24c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 955

22 slotShow NOTES OPERANDS EXAMPLES DISABLED FAULTY UNKNOWN The blade is powered on but disabled. The blade is faulty because an error was detected. The blade is inserted but its state cannot be determined. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command supports the following operands: -p In addition to the basic slot status view, displays the following information about power consumption: • Total direct current (DC) power consumption for the chassis and individual values for each blade (in Watts). Note that usage for other components is included but not listed. • Total alternating current (AC) power consumption in Watts. • AC efficiency, as a percentage of total and BTU. • Power efficiency in Watts/port and Watts/Gb. -m In addition to the basic slot status view, displays the Brocade model name for each blade. To display the status of all slots on a DCX 8510-8: switch:user> slotshow Slot Blade Type ID Status 1 UNKNOWN VACANT 2 AP BLADE 43 ENABLED 3 UNKNOWN VACANT 4 SW BLADE 97 ENABLED 5 CORE BLADE 98 ENABLED 6 CP BLADE 50 ENABLED 7 CP BLADE 50 ENABLED 8 CORE BLADE 98 ENABLED 9 AP BLADE 75 ENABLED 10 SW BLADE 97 ENABLED 11 SW BLADE 77 ENABLED 12 SW BLADE 96 ENABLED To display the Brocade model name for each blade on a Brocade DCX 8510-8: switch:user> slotshow -m Slot Blade Type ID Model Name Status 1 UNKNOWN VACANT 2 AP BLADE 43 FS8-18 ENABLED 3 UNKNOWN VACANT 4 SW BLADE 97 FC16-32 ENABLED 5 CORE BLADE 98 CR16-8 ENABLED 6 CP BLADE 50 CP8 ENABLED Fabric OS Command Reference 921 53-1001764-01