HP Brocade 8/24c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 638
portshow ipif, portcfg ipif ge0 delete 192.168.10.20
View all HP Brocade 8/24c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 638 highlights
22 portCfg To create an interface for a failover crossport on a Brocade FX8-24: 1. Configure the interface for the local XGE port (xge0). switch:admin> portcfg ipif 8/xge0 create 192.168.10.20 \ 255.255.255.0 1500 Operation Succeeded 2. Configure the interface for the nonlocal XGE port (xge1). switch:admin> portcfg ipif 8/xge1 create 192.168.11.20 \ 255.255.255.0 1500 -x Operation Succeeded 3. The IP address 192.168.11.20 will be available for circuits on VE_Ports 22-31. The output from portshow ipif for the same address shows the crossport tag. switch:admin> portshow ipif 8/xge0 Port: 8/xge0 Interface IPv4 Address NetMask Effective MTU Flags 0 192.168.10.20 255.255.255.0 1500 U R M 3 192.168.11.20 255.255.255.0 1500 U R M (crossport) To delete an IP interface: switch:admin> portcfg ipif ge0 delete 192.168.10.20 Operation Succeeded To delete an IP interface for a failover crossport: switch:admin> portcfg ipif 8/xge0 delete 192.168.11.20 -x Operation Succeeded To create a static IP route using an IPv4 destination address, a netmask, and a gateway address: switch:admin> portcfg iproute ge0 create \ 192.42.0.0 255.255.255.0 192.168.0.250 Operation Succeeded To create a static IP route using IPv6: switch:admin> portcfg iproute ge0 create \ 2010::/64 2000::1:250 Operation Succeeded switch:admin> portshow iproute ge0 Port: ge0 IP Address Mask Gateway Metric Flags 192.42.0.0 255.255.255.0 192.168.0.250 0 U G 192.168.0.0 255.255.255.0 * 0 U C 192.168.0.10 255.255.255.255 * 0 U H L 192.168.0.11 255.255.255.255 * 0 U H L 192.168.0.21 255.255.255.255 * 0 U C 192.168.0.250 255.255.255.255 * 0 U H L IPv6 Address Len Gateway Metric Flags 2000:: 64 * 0 U C 2000::10 128 * 0 U H L 604 Fabric OS Command Reference 53-1001764-01