HP Brocade 8/24c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 639
portshow iproute, Flags: U=Usable G=Gateway H=Host C=CreatedInterface S=Static
View all HP Brocade 8/24c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 639 highlights
22 portCfg 2000::11 2000::1:250 2001:: fe80:: ff01:: ff02:: 128 * 128 * 64 2000::1:250 64 * 32 * 32 * 0 U H L 0 U H L 0 U G 0 U C 0 U C 0 U C Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static L=LinkLayer(Arp) To create an IP route for a failover crossport on a Brocade FX8-24: 1. Configure the iproute for the local XGE port (xge0). switch:admin> portcfg iproute 8/xge0 create 2.2.2.0 \ 255.255.255.0 192.168.11.250 Operation Succeeded 2. Configure the interface for the nonlocal XGE port (xge1). switch:admin> portcfg ipif 8/xge1 create 1.1.1.0 \ 255.255.255.0 192.168.11.250 -x Operation Succeeded 3. The IP route will be available for circuits on VE ports 22-31. The output from portshow iproute for the same route shows the crossport tag. switch:admin> portshow iproute 8/xge0 Port: 8/xge0 IP Address Mask Gateway Metric Flags 2.2.2.0 255.255.255.128 192.168.10.251 0 U G S 2.2.2.0 255.255.255.0 192.168.10.250 0 U G S 192.168.10.0 255.255.255.0 * 0 UC 192.168.10.250 255.255.255.255 * 0 UHL 192.168.10.251 255.255.255.255 * 0 UHL 1.1.1.0 255.255.255.0 192.168.11.250 0 U G S (crossport) 192.168.11.0 255.255.255.0 * 0 U C (crossport) 192.168.11.250 255.255.255.255 * 0 U H L (crossport) To delete the crossport IP route: switch:admin> portcfg iproute 8/xge1 delete \ 1.1.1.0 255.255.255.0 -x Operation Succeeded To delete a static IP route using an IPv4 address: switch:admin> portcfg iproute ge0 delete \ 172.16.0.0 255.255.0.0 Operation Succeeded To create a network-wide permanent VLAN tag entry with a VLAN ID of 200 and an L2 CoS value of 5 (no destination address): switch:admin> portcfg vlantag ge2 add \ 192.168.2.10 200 5 Operation Succeeded Fabric OS Command Reference 605 53-1001764-01