HP Brocade BladeSystem 4/12 HP StorageWorks Fabric OS 6.1.1 administrator guid - Page 281

4. Issue the cfgEnable command. switch:admin> cfgenable iscsi_cfg001 You are about to enable a new zoning configuration. This action will replace the old zoning configuration with the current configuration selected. Do you want to enable 'iscsi_cfg001' configuration (yes, y, no, n): [no] y zone config "iscsi_cfg001" is in effect Updating flash ... switch:admin> iSNS client service configuration The internet storage name service (iSNS) server facilitates the automatic discovery and manages access control of iSCSI VTs on a TCP/IP network. iSNS clients initiate transactions with iSNS servers using the iSNS protocol, register available iSCSI VTs, download information about other registered clients (such as iSCSI initiators), and receive notification of events that occur in the DDs. iS NS s erver IP Network iS NS client iS C S I initiator iS NS client iS CS I VT 1 FC target 1 FC S AN iS C S I gateway s ervic e Figure 26 iSCSI network with iSNS server and clients NOTE: Fabric OS supports only Microsoft iSNS Server 3.0 and later. Displaying iSNS client service status 1. Connect and log in to the switch. 2. Issue the fosConfig command to show the current Fabric OS configuration. switch:admin> fosconfig --show FC Routing service:disabled iSCSI service:enabled iSNS Client service:disabled Fabric OS 6.1.x administrator guide 281