HP Brocade BladeSystem 4/12 HP StorageWorks Fabric OS 6.1.1 administrator guid - Page 323

6. Issue either the portCfgEXPort or portShow command to verify that each port is configured correctly: switch:admin> portcfgexport 7/10 Port 7/10 info Admin: enabled State: NOT OK Pid format: Not Applicable Operate mode: Brocade Native Edge Fabric ID: 30 Preferred Domain ID: 160 Front WWN: 50:06:06:9e:20:38:6e:1e Fabric Parameters: Auto Negotiate R_A_TOV: Not Applicable E_D_TOV: Not Applicable Authentication Type: None DH Group: N/A Hash Algorithm: N/A Edge fabric's primary wwn: N/A Edge fabric's version stamp: N/A switch:admin_06> portshow 7/10 portName: portHealth: OFFLINE Authentication: None EX_Port Mode: Enabled Fabric ID: 30 Front Phantom: state = Not OK Pref Dom ID: 160 Fabric params: R_A_TOV: 0 to E_D_TOV: 0 PID fmt: au Authentication Type: None Hash Algorithm: N/A DH Group: N/A Edge fabric's primary wwn: N/A Edge fabric's version stamp: N/A portDisableReason: None portCFlags: 0x1 portFlags: 0x1 PRESENT U_PORT EX_PORT portType: 10.0 portState: 2 Offline portPhys: 2 No_Module portScn: 0 port generation number: 0 portId: 014a00 portIfId: 4372080f portWwn: 20:4a:00:60:69:e2:03:86 portWwn of device(s) connected: Distance: normal portSpeed: N4Gbps LE domain: 0 FC Fastwrite: ON Interrupts: 0 Unknown: 0 Lli: 0 Link_failure: 0 Loss_of_sync: 0 Loss_of_sig: 2 Frjt : 0 Fbsy : 0 Fabric OS 6.1.x administrator guide 323