HP Brocade BladeSystem 4/12 HP StorageWorks Fabric OS 6.1.1 administrator guid - Page 312

Supported configurations In an edge fabric that contains a mix of administrative domain (AD)-capable switches and switches that are not aware of AD, the FC router must be connected directly to the AD-capable switch. For more information, see "Use of administrative domains with LSAN zones and FCR" on page 329. You can use SANtegrity to configure M-Series switches connecting to a B-Series router. For more information, see "Implementing an interoperable fabric" on page 245. The supported configurations are: • FC router connected to an HP nonsecured fabric. • FC router connected to an HP secured fabric. • FC router connected to a McDATA fabric configured for Open Mode 1. • FC router connected to a McDATA fabric configured for McDATA fabric mode. • FC router connected to HP secured and nonsecured fabrics with EX_Port trunking enabled. • FC router interoperating with older FC routers (XPath OS 7.4.x and Fabric OS 5.1. McDATA Enterprise OS switches cannot exist in the backbone fabric. Fibre Channel routing concepts Fibre Channel routing introduces the following concepts: • Backbone Fabric A backbone (BB) fabric is an intermediate network that connects one or more edge fabrics. In a SAN, the backbone fabric consists of at least one FC router and possibly a number of Fabric OS-based Fibre Channel switches (see Figure 39). • Edge Fabric An edge fabric is a Fibre Channel fabric with targets and initiators connected through the supported platforms by using an EX_Port or VEX_Port. • EX_Port, VEX_Port Special types of ports, called an EX_Port and a VEX_Port, function similarly to an E_Port and VE_Port respectively, but terminate at the switch and do not propagate fabric services or routing topology information from one edge fabric to another. See "Configuring and monitoring FCIP extension services" on page 385 for details about VE_Ports. • Interfabric link (IFL) The link between an E_Port and an EX_Port or between a VE_Port and a VEX_Port is called an interfabric link. You can configure multiple IFLs from an FC router to an edge fabric. Figure 37 shows a metaSAN consisting of three edge fabrics connected through a 4/256 SAN Director or DC Director containing an FR4-18i with interfabric links. 312 Using the FC-FC routing service