HP Brocade BladeSystem 4/12 HP StorageWorks Fabric OS 6.1.1 administrator guid - Page 287
F_Port, there are multiple N_Ports, each with a different port WWN.
View all HP Brocade BladeSystem 4/12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
The following example shows whether or not a port is configured for NPIV: switch:admin> portcfgshow Ports of Slot 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN Trunk Port ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON Long Distance VC Link Init Locked L_Port Locked G_Port Disabled E_Port ISL R_RDY Mode RSCN Suppressed Persistent Disable NPIV capability ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON Use the switchShow and portShow commands to view NPIV information for a given port. If a port is an F_Port, and you issue the switchShow command, the port WWN of the N_Port is returned. For an NPIV F_Port, there are multiple N_Ports, each with a different port WWN. The switchShow command output indicates whether a port is an NPIV F_Port, and identifies the number of virtual N_Ports behind it. The following is sample output from the switchShow command: switch: admin> switchshow switchName:swd77 switchType:32.0 switchState: Online switchMode:Native switchRole:Principal switchDomain: 99 switchId:fffc63 switchWwn:10:00:00:05:1e:35:37:40 zoning: OFF switchBeacon:OFF Area Port Media Speed State 0 0 id N2 Online F-Port 1 1 id N2 Online F-Port 2 2 id N2 Online F-Port 3 3 id N2 Online F-Port 4 4 id N2 Online F-Port ... 50:05:07:64:01:20:73:b8 50:05:07:64:01:60:73:b8 65 NPIV public 50:05:07:64:01:e0:73:b8 50:05:07:64:01:20:73:b5 Fabric OS 6.1.x administrator guide 287