HP Brocade BladeSystem 4/12 HP StorageWorks Fabric OS 6.1.1 administrator guid - Page 288
Following is sample output for
View all HP Brocade BladeSystem 4/12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
Use the portShow command to view the NPIV attributes and all the N_Port (physical and virtual) port WWNs that are listed under portWwn of device(s) connected. Following is sample output for the portShow command: switch:admin> portshow 2 portName: 02 portHealth: HEALTHY Authentication: None portDisableReason: None portCFlags: 0x1 portFlags: 0x24b03 PRESENT ACTIVE F_PORT G_PORT NPIV LOGICAL_ONLINE LOGIN NOELP LED ACCEPT portType: 10.0 portState: 1Online portPhys: 6In_Sync portScn: 32F_Port port generation number: 148 portId: 630200 portIfId: 43020005 portWwn: 20:02:00:05:1e:35:37:40 portWwn of device(s) connected: c0:50:76:ff:fb:00:16:fc c0:50:76:ff:fb:00:16:f8 ... ... c0:50:76:ff:fb:00:16:80 50:05:07:64:01:a0:73:b8 Distance: normal portSpeed: N2Gbps Interrupts: 0 Link_failure: 16 Frjt: 0 Unknown: 0 Loss_of_sync: 422 Fbsy: 0 Lli: 294803 Loss_of_sig: 808 Proc_rqrd: 0 Protocol_err: 0 Timed_out: 0 Invalid_word: 0 Rx_flushed: 0 Invalid_crc: 0 Tx_unavail: 0 Delim_err: 0 Free_buffer: 0 Address_err: 1458 Overrun: 0 Lr_in: 15 Suspended: 0 Lr_out: 17 Parity_err: 0 Ols_in: 16 2_parity_err: 0 Ols_out: 15 CMI_bus_err: 0 288 Administering NPIV