HP C8975A HP Deskjet 5800 Series printer - (English) User Guide - Page 67
connecting the printer to an ethernet network, Verify that the printer is powered on.
View all HP C8975A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
connecting the printer to an ethernet network Follow these steps to connect the printer to an Ethernet network: 1. If necessary, set up the printer hardware. For printer hardware setup instructions, see the setup poster that came with the printer. 2. Verify that the printer is powered on. 3. Connect the Ethernet cable to an available port on the network hub or router. Do not plug the Ethernet cable into a port labeled WAN or Uplink. 4. Connect the Ethernet cable to the Ethernet port on the back of the printer. The printer's wireless radio is disabled when a Ethernet cable is connected to the printer. 5. Do one of the following: if the link light is... then...
connecting the printer to an ethernet network
Follow these steps to connect the printer to an Ethernet network:
1.
If necessary, set up the printer hardware.
For printer hardware setup instructions, see the
setup
poster that came with
the printer.
2.
Verify that the printer is powered on.
3.
Connect the
Ethernet cable
to an available port on the network
hub
or
router
.
Do not plug the Ethernet cable into a port labeled
WAN
or
Uplink
.
4.
Connect the Ethernet cable to the Ethernet port on the back of the printer.
The printer's wireless radio is disabled when a Ethernet cable
is connected to the printer.
5.
Do one of the following:
if the link light is...
then...