HP CP4005dn HP Color LaserJet CP4005 - User Guide - Page 182
Control panel message, Description, Recommended action, CAUTION, SYSTEM IS FULL
UPC - 882780717169
View all HP CP4005dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Control panel message [FS] DEVICE WRITE PROTECTED To clear press alternates with Ready [FS] FILE SYSTEM IS FULL To clear press alternates with Ready [FS] NOT INITIALIZED ABCDEFGHIJ 0110000000 alternates with To exit press. Stop Access Denied MENUS LOCKED BAD DUPLEXER CONNECTION alternates with For help press BAD OPTIONAL TRAY CONNECTION BLACK CARTRIDGE IN WRONG POSITION alternates with For help press Description The file system device is protected and no new files can be written to it. Recommended action 1. To enable writing to the Flash Memory, turn off write protection, using HP Web Jetadmin. 2. To clear the message, press the key. 3. If the message persists, turn the printer off then on. The printer received a PJL file system 1. command that attempted to store something on the file system but was unsuccessful because the file system is full. 2. Use HP Web Jetadmin software to delete files from the Flash Memory and try again. To clear the message, press the key. 3. If the message persists, turn the printer off then on. The device has not been initialized. You can use Web JetAdmin to initialize the device. This message is displayed when a paper path sensor test or a paper path test is run. The alphabetical value indicates which sensor is being checked. No action necessary. An attempt has been made to modify a menu item while the control panel security mechanism is enabled by the printer administrator. The message will disappear shortly, and the printer will return to Ready state. Contact the printer administrator to change settings. The duplexer is not connected properly and must be reinserted before printing can continue. Turn the printer off. Press to see step by step information. The 500-sheet input tray is not making proper 1. Verify that the printer is on a level connection with the printer. surface. 2. Turn the printer off. 3. Reseat the printer on the 500-sheet input tray. 4. Turn the printer on after reseating the 500-sheet input tray. The black cartridge is installed in the wrong 1. Open the top and front covers. slot and the cover is closed. CAUTION The image transfer unit can be easily damaged. 2. Open the image transfer unit. 166 Chapter 8 Problem solving ENWW