HP CP4005dn HP Color LaserJet CP4005 - User Guide - Page 211
Incorrect tray, Automatic feed error, Tray 2 or optional Tray 3 feed error, Table 8-3
UPC - 882780717169
View all HP CP4005dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Incorrect tray Table 8-3 Printer pulls from incorrect tray Cause and solution Cause Solution You are using a driver for a different printer. For more Use a driver for this printer. information, see Printer drivers or Printer drivers for Macintosh computers. The specified tray is empty. Load media in the specified tray. Tray behavior for the requested tray is set to FIRST in the SYSTEM SETUP submenu of the CONFIGURE DEVICE menu. Change the setting to EXCLUSIVELY. The media size is not configured correctly for the input tray. Print a configuration page or use the control panel to determine the media size for which the tray is configured. The guides in the tray are not against the paper. Verify that the guides are touching the paper. Automatic feed error Table 8-4 Media does not feed automatically Cause and solution Cause Solution Manual feed is selected in the software application. Load Tray 1 with media, or, if the media is loaded, press . The correct size media is not loaded. Load the correct size media. The input tray is empty. Load media into the input tray. Media from a previous jam has not been completely removed. Open the printer and remove any media in the paper path. Closely inspect the fuser area for jams. See Paper jams. The media size is not configured correctly for the input tray. Print a configuration page or use the control panel to determine the media size for which the tray is configured. The guides in the tray are not against the paper. Verify that the rear and width media guides are touching the paper. Tray 2 or optional Tray 3 feed error Table 8-5 Media does not feed from Tray 2 or optional Tray 3 Cause and solution Cause Manual feed is selected in the software application. The correct size media is not loaded. The input tray is empty. Solution Load Tray 1 with media, or, if the media is loaded, press . Load the correct size media. Load media in the input tray. ENWW Media-handling problems 195