HP Chromebook x360 13.3 inch 13b-ca0000 Maintenance and Service Guide - Page 45

Display assembly, Disconnect the camera cable

Get HP Chromebook x360 13.3 inch 13b-ca0000 PDF manuals and user guides View all HP Chromebook x360 13.3 inch 13b-ca0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

6. When replacing a system board, be sure that a thermal pad is installed at the location shown in the following illustration. To install the system board, reverse this procedure. Display assembly To remove and disassemble the display assembly, use these procedures and illustrations. NOTE: The display assembly is spared at the subcomponent level. For display assembly spare part information, see the individual removal subsections. Before removing the display panel, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 25). 2. Remove the bottom cover (see Bottom cover on page 27). 3. Remove the battery (see Battery on page 28). 4. Remove the WLAN antenna bracket (see WLAN module on page 30). Remove the display assembly: 1. Disconnect the camera cable (1) and display cable (2) from the ZIF connectors on the system board. 2. Remove the display cable from the clips along the top of the computer (3). 3. Disconnect the antenna cables from the terminals on the WLAN module (4). 40 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
6.
When replacing a system board, be sure that a thermal pad is installed at the location shown in the
following illustration.
To install the system board, reverse this procedure.
Display assembly
To remove and disassemble the display assembly, use these procedures and illustrations.
NOTE:
The display assembly is spared at the subcomponent level. For display assembly spare part
information, see the individual removal subsections.
Before removing the display panel, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
25
).
2.
Remove the bottom cover (see
Bottom cover
on page
27
).
3.
Remove the battery (see
Battery
on page
28
).
4.
Remove the WLAN antenna bracket (see
WLAN module
on page
30
).
Remove the display assembly:
1.
Disconnect the camera cable
(1)
and display cable
(2)
from the ZIF connectors on the system board.
2.
Remove the display cable from the clips along the top of the computer
(3)
.
3.
Disconnect the antenna cables from the terminals on the WLAN module
(4)
.
40
Chapter 5
Removal and replacement procedures for authorized service provider parts