HP Chromebox G2 Maintenance and Service Guide - Page 24

and then pry the bottom cover, Reverse this procedure to install the bottom cover.

Page 24 highlights

3. Remove the four Phillips M2.5×4.0 screws (2) that secure the bottom cover to the computer. 4. Insert a flat, non-marking tool into the gap under the bottom cover near the USB ports on the rear of the computer (1), and then pry the bottom cover off the computer (2). Reverse this procedure to install the bottom cover. 18 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51

3.
Remove the four Phillips M2.5×4.0 screws
(2)
that secure the bottom cover to the computer.
4.
Insert a
flat,
non-marking tool into the gap under the bottom cover near the USB ports on the rear of the
computer
(1)
, and then pry the bottom cover
off
the computer
(2)
.
Reverse this procedure to install the bottom cover.
18
Chapter 5
Removal and replacement procedures