HP Chromebox G2 Maintenance and Service Guide - Page 44
Power button board, Separate the plastic top cover from the metal top shield see
View all HP Chromebox G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Power button board The power button board is installed onto the metal top shield. Description Power button board (does not include cable) Power button board cable Spare part number L17270-001 L17260-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 17). 5. Remove the rear I/O bracket (see Rear I/O bracket on page 20). 6. Remove the bottom shield (see Bottom shield on page 21). 7. Remove the system board (see System board on page 31). 8. Separate the plastic top cover from the metal top shield (see Top cover (plastic) and metal top shield on page 36). Remove the power button board: 1. Position the metal top shield with the power button board facing you. 2. Remove the two Phillips M2.0×3.0 screws (1) that secure the board to the metal top shield. 38 Chapter 5 Removal and replacement procedures