HP Chromebox G2 Maintenance and Service Guide - Page 37
System board, defective system board and install them on the replacement system board
View all HP Chromebox G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
System board NOTE: All system board spare part kits include a processor and replacement thermal material. Description System board with integrated Intel Core i7-8650U processor System board with integrated Intel Core i5-7300 processor System board with integrated Intel Celeron 3865U processor HDMI gasket Spare part number L17277-001 L17276-001 L17275-001 L17846-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 17). 5. Remove the rear I/O bracket (see Rear I/O bracket on page 20). 6. Remove the bottom shield (see Bottom shield on page 21). When replacing the system board, be sure to remove the following components (as applicable) from the defective system board and install them on the replacement system board: ● WLAN module (see WLAN module on page 25) ● Memory modules (see Memory module on page 27) ● Fan (see Fan on page 33) ● Heat sink (see Heat sink on page 34) Remove the system board: 1. Disconnect the power button board cable from the system board (1). 2. Remove the three larger Phillips M2.5×4.0 screws (2) and the smaller Phillips M2.0×2.0 screw (3) that secures the system board to the computer. Component replacement procedures 31