HP Chromebox G2 Maintenance and Service Guide - Page 29

Power connector cable, Remove the power connector cable

Get HP Chromebox G2 PDF manuals and user guides View all HP Chromebox G2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Power connector cable The power connector cable is installed on the bottom shield. Description Power connector cable Power connector bracket Power connector conductive tape Spare part number L17259-001 L17266-001 L17265-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 17). 5. Remove the rear I/O bracket (see Rear I/O bracket on page 20). 6. Remove the bottom shield (see Bottom shield on page 21). Remove the power connector cable: 1. Position the bottom shield upside-down. 2. Remove the two Phillips M2.5×4.0 screws (1) that secure the power connector cable to the bottom shield. 3. Remove the bracket (2). Component replacement procedures 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
Power connector cable
The power connector cable is installed on the bottom shield.
Description
Spare part number
Power connector cable
L17259-001
Power connector bracket
L17266-001
Power connector conductive tape
L17265-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom
cover (see
Bottom cover
on page
17
).
5.
Remove the rear I/O bracket (see
Rear I/O bracket
on page
20
).
6.
Remove the bottom shield (see
Bottom shield
on page
21
).
Remove the power connector cable:
1.
Position the bottom shield upside-down.
2.
Remove the two Phillips M2.5×4.0 screws
(1)
that secure the power connector cable to the bottom
shield.
3.
Remove the bracket
(2)
.
Component replacement procedures
23