HP Chromebox G2 Maintenance and Service Guide - Page 39

Fan, Position the system board upside-down.

Get HP Chromebox G2 PDF manuals and user guides View all HP Chromebox G2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Fan The fan is installed on the bottom of the system board. Description Fan Spare part number 767360-001 Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 17). 5. Remove the rear I/O bracket (see Rear I/O bracket on page 20). 6. Remove the bottom shield (see Bottom shield on page 21). 7. Remove the system board (see System board on page 31). Remove the fan: 1. Position the system board upside-down. 2. Disconnect the fan cable from the system board (1). 3. Remove the two Phillips M2.5×4.0 screws (2) that secure the fan to the system board. 4. Remove the fan from the system board (3). Reverse this procedure to install the fan. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
Fan
The fan is installed on the bottom of the system board.
Description
Spare part number
Fan
767360-001
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
17
).
5.
Remove the rear I/O bracket (see
Rear I/O bracket
on page
20
).
6.
Remove the bottom shield (see
Bottom shield
on page
21
).
7.
Remove the system board (see
System board
on page
31
).
Remove the fan:
1.
Position the system board upside-down.
2.
Disconnect the fan cable from the system board
(1)
.
3.
Remove the two Phillips M2.5×4.0 screws
(2)
that secure the fan to the system board.
4.
Remove the fan from the system board
(3)
.
Reverse this procedure to install the fan.
Component replacement procedures
33