HP Chromebox G3 Maintenance and Service Guide - Page 31

Preparation for disassembly, Bottom cover, that secure the bottom cover to the Chromebox.

Get HP Chromebox G3 PDF manuals and user guides View all HP Chromebox G3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Preparation for disassembly Bottom cover To remove the bottom cover, use this procedure and illustration. Table 6-1 Bottom cover description and part number Description Bottom cover Spare part number L17258-001 Before removing the bottom cover, prepare the Chromebox for disassembly (Preparation for disassembly on page 27). Remove the bottom cover: 1. Position the Chromebox upside down with the rear toward you. 2. Remove the four rubber feet (1). The rubber feet are available in the Rubber Feet Kit, spare part number L17271-001. 3. Remove the four Phillips M2.5 × 5.0 screws (2) that secure the bottom cover to the Chromebox. 4. Use a case utility tool or similar thin plastic tool (1) to separate the front edge of the bottom cover (2) from the Chromebox. ENWW Component replacement procedures 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Preparation for disassembly
Bottom cover
To remove the bottom cover, use this procedure and illustration.
Table 6-1
Bottom cover description and part number
Description
Spare part number
Bottom cover
L17258-001
Before removing the bottom cover, prepare the Chromebox for disassembly (
Preparation for disassembly
on page
27
).
Remove the bottom cover:
1.
Position the Chromebox upside down with the rear toward you.
2.
Remove the four rubber feet
(1)
.
The rubber feet are available in the Rubber Feet Kit, spare part number L17271-001.
3.
Remove the four Phillips M2.5 × 5.0 screws
(2)
that secure the bottom cover to the Chromebox.
4.
Use a case utility tool or similar thin plastic tool
(1)
to separate the front edge of the bottom cover
(2)
from
the Chromebox.
ENWW
Component replacement procedures
27