HP Chromebox G3 Maintenance and Service Guide - Page 42
Heat sink, To remove the heat sink, use these procedures and illustrations.
![]() |
View all HP Chromebox G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
1. Remove the I/O side frame (I/O side frame on page 28). 2. Remove the bottom shield (Bottom shield on page 29). 3. Remove the system board (System board on page 35). Remove the fan: 1. Turn the system board right side up with the front toward you. 2. Disconnect the fan cable (1) from the system board. 3. Remove the two Phillips M2.0 × 4.0 screws (2) that secure the fan to the system board. 4. Remove the fan (3). Reverse this procedure to install the fan. Heat sink To remove the heat sink, use these procedures and illustrations. Table 6-10 Heat sink description and part number Description Heat sink (15 W, includes replacement thermal material) Spare part number M24726-001 Before removing the heat sink, follow these steps: 1. Prepare the Chromebox for disassembly (Preparation for disassembly on page 27). 2. Remove the bottom cover (Bottom cover on page 27), and then remove the following components: 1. Remove the I/O side frame (I/O side frame on page 28). 2. Remove the bottom shield (Bottom shield on page 29). 3. Remove the system board (System board on page 35). 4. Remove the fan (Fan on page 37). 38 Chapter 6 Removal and replacement procedures for authorized service provider parts ENWW
![](/manual_guide/products/hewlettpackard-chromebox-g3-maintenance-service-guide-f2b2dfb/42.png)