HP Chromebox G3 Maintenance and Service Guide - Page 38

Before removing the memory module, follow these steps

Get HP Chromebox G3 PDF manuals and user guides View all HP Chromebox G3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Before removing the memory module, follow these steps: 1. Prepare the Chromebox for disassembly (Preparation for disassembly on page 27). 2. Remove the bottom cover (Bottom cover on page 27). 3. Remove the I/O side frame (I/O side frame on page 28). 4. Remove the bottom shield (Bottom shield on page 29). Remove the memory module: 1. Insert a case utility tool or similar thin, plastic tool into the openings (1) on either side of the memory module shield and remove the shield (2). The memory module shield is available using spare part number L17264-001. NOTE: When installing the memory module shield, be sure that the edges of the shield fit securely into the retention clips (3) built into the system board. 34 Chapter 6 Removal and replacement procedures for authorized service provider parts ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Before removing the memory module, follow these steps:
1.
Prepare the Chromebox for disassembly (
Preparation for disassembly
on page
27
).
2.
Remove the bottom cover (
Bottom cover
on page
27
).
3.
Remove the I/O side frame (
I/O side frame
on page
28
).
4.
Remove the bottom shield (
Bottom shield
on page
29
).
Remove the memory module:
1.
Insert a case utility tool or similar thin, plastic tool into the openings
(1)
on either side of the memory
module shield and remove the shield
(2)
. The memory module shield is available using spare part number
L17264-001.
NOTE:
When installing the memory module shield, be sure that the edges of the shield fit securely into
the retention clips
(3)
built into the system board.
34
Chapter 6
Removal and replacement procedures for authorized service provider parts
ENWW