HP Chromebox G3 Maintenance and Service Guide - Page 34
Power connector cable, Remove the power connector cable
![]() |
View all HP Chromebox G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4. Disconnect the power connector cable from the system board connector (5). 5. Remove the bottom shield. To replace the bottom shield, reverse the removal procedures. Power connector cable To remove the power connector cable, use these procedures and illustrations. Table 6-4 Power connector cable description and part number Description Power connector cable Spare part number L17259-001 Before removing the power connector cable, follow these steps: 1. Prepare the Chromebox for disassembly (Preparation for disassembly on page 27). 2. Remove the bottom cover (Bottom cover on page 27). 3. Remove the I/O side frame (I/O side frame on page 28). 4. Remove the bottom shield (Bottom shield on page 29). Remove the power connector cable: 1. Turn the bottom shield right side up with the rear panel toward you. 2. Remove the two Phillips M2.5 × 5.0 screws (1) that secure the power connector cable to the bottom shield. 3. Remove the power connector cable bracket (2). The power connector cable bracket is available using spare part number M42090-001. 4. Remove the power connector cable (3). 30 Chapter 6 Removal and replacement procedures for authorized service provider parts ENWW
![](/manual_guide/products/hewlettpackard-chromebox-g3-maintenance-service-guide-f2b2dfb/34.png)