HP Chromebox G3 Maintenance and Service Guide - Page 45
Remove the power button board
View all HP Chromebox G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Remove the power button board: 1. Remove the two Phillips M2.0 × 3.0 broad head screws (1) that secure the power button board to the top shield. 2. Remove the power button board (2). 3. If it is necessary to replace the power button board cable, disconnect the cable from the connector (3) on the power button board. The power button board cable is available using spare part number M42089-001. Reverse this procedure to install the power button board. ENWW Component replacement procedures 41
Remove the power button board:
1.
Remove the two Phillips M2.0 × 3.0 broad head screws
(1)
that secure the power button board to the top
shield.
2.
Remove the power button board
(2)
.
3.
If it is necessary to replace the power button board cable, disconnect the cable from the connector
(3)
on
the power button board. The power button board cable is available using spare part number M42089-001.
Reverse this procedure to install the power button board.
ENWW
Component replacement procedures
41