HP Chromebox G3 Maintenance and Service Guide - Page 33
Bottom shield, Detach the bottom shield front protective strip
![]() |
View all HP Chromebox G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3. Remove the I/O side frame (3) by swinging it up and out of the Chromebox. To replace the I/O side frame, reverse the removal procedures. Bottom shield To remove the bottom shield, use this procedure and illustration. Table 6-3 Bottom shield description and part number Description Bottom shield Spare part number M41139-001 Before removing the bottom shield, follow these steps: 1. Prepare the Chromebox for disassembly (Preparation for disassembly on page 27). 2. Remove the bottom cover (Bottom cover on page 27). 3. Remove the I/O side frame (I/O side frame on page 28). Remove the bottom shield: 1. Remove the four Phillips M2.5 × 5.0 screws (1) that secure the bottom shield to the Chromebox. 2. Detach the bottom shield front protective strip (2) and the bottom shield padding (3) from the bottom shield. (The bottom shield front protective strip is attached to the bottom shield with double-sided adhesive.) The bottom shield front protective strip is included in the Shield Kit, spare part number L20217-001. 3. Release the bottom shield (4) as far as the power connector cable will allow. ENWW Component replacement procedures 29
![](/manual_guide/products/hewlettpackard-chromebox-g3-maintenance-service-guide-f2b2dfb/33.png)