HP Cluster Platform Introduction v2010 HP Cluster Platform Workgroup System To - Page 16
HP GbE2c Ethernet Blade Switch and the Optional InfiniBand Network
View all HP Cluster Platform Introduction v2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Note: Control and compute nodes must belong to the same processor family. For example, control nodes that use AMD Opteron processors must be used if you are using the ProLiant BL465c as the compute node. • Networks: The networks included in a Workgroup System Tower configuration are: - Administrative network: An administrative network eases cluster administration and management functions, such as managing a user's applications. - Console network: The console network enables the use of node-specific commands such as power one. Each compute node embedded Integrated Lights-Out (iLO) port is connected to the Fast Ethernet-based console network. Note: The administrative HP GbE2c Gigabit Ethernet switch is integrated in the Workgroup System Tower. Access to the console network is provided by the iLO port on the Onboard Administrator (OA). - Optional InfiniBand interconnect network: An optional InfiniBand interconnect high-performance network is dedicated to supporting inter nodal application traffic (such as MPI communication) and you can also select file transfer. In the absence of an InfiniBand interconnect, this traffic is transmitted over the gigabit Ethernet network (Administrative network). • Optical media device: Access to a DVD drive is required for software installation. The Workgroup System Tower has a DVD drive installed. For more information about hardware and software used in HP Cluster Platform and throughout the Unified Cluster Portfolio, go to: http://h20311.www2.hp.com/HPC/cache/276360-0-0-0-121.html 1.2.1 HP GbE2c Ethernet Blade Switch and the Optional InfiniBand Network Your Workgroup System Tower includes the HP GbE2c Ethernet switch and might also include an optional InfiniBand high-speed network. Section 1.2.1.1 describes the HP GbE2c Ethernet Blade Switch, and Section 1.2.1.2 describes the 4X DDR InfiniBand Interconnect module used for the optional InfiniBand network. 1.2.1.1 HP GbE2c Ethernet Switch The HP GbE2c Ethernet switch, which is also documented in the HP Cluster Platform Gigabit Ethernet Interconnect Guide, is used for administrative and console networking in Workgroup System Tower solutions. You can also use this network for Message Passing Interface (MPI) applications. Cluster management on server blade configurations is supported over an administration network with both console and operating-system level management branches. These branches share a physical switch that can be separated using VLANs, if required. In the Workgroup System Tower, one server blade in the configuration is designated as the control node and can be configured separately from the others in the cluster. All of the other server blades in the Workgroup System Tower must be configured identically and the processor subsystems must be identical. Also, all of the server blade processors must be of the same type and frequency and must have the same memory configuration. By default, Workgroup System Tower configurations are available with the gigabit Ethernet interconnect using the HP GbE2c Ethernet Blade switch. 16 Cluster Platform Workgroup System Tower Overview