HP Cluster Platform Introduction v2010 HP Cluster Platform Workgroup System To - Page 24
Remove the Box, Remove the Ramp and Front Cushion
![]() |
View all HP Cluster Platform Introduction v2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Figure 3-2 Remove the Box 1 5. Remove the front section of the bottom cushion (callout 2) along with the ramp (callout 1), as shown in Figure 3-3. Figure 3-3 Remove the Ramp and Front Cushion 1 2 6. Attach the ramp to the plywood deck using the velcro strips, as shown by callout 1 in Figure 3-4. 24 Unpacking and Removing a Workgroup System Tower from a Pallet
![](/manual_guide/products/hewlettpackard-cluster-platform-introduction-v2010-hp-cluster-platform-workgroup-tower-hardware-installation-guide-035f34f/24.png)
Figure 3-2 Remove the Box
1
5.
Remove the front section of the bottom cushion (callout 2) along with the ramp (callout 1),
as shown in
Figure 3-3
.
Figure 3-3 Remove the Ramp and Front Cushion
2
1
6.
Attach the ramp to the plywood deck using the velcro strips, as shown by callout 1 in
Figure 3-4
.
24
Unpacking and Removing a Workgroup System Tower from a Pallet