HP Color LaserJet CP2025 HP Color LaserJet CP2020 Series - User Guide - Page 110

Load [size] Press [OK], To accept Press [OK] - replace roller

Page 110 highlights

Control-panel message Status alert Rear Door open Remove shipping locks from cartridge Remove shipping locks from all cartridges Remove shipping material from rear door Replace cartridge Replace supply Override in use Unexpected size in tray # Load [size] Press [OK] Used Cartridge in use Used supplies in use Used supply installed To accept Press [OK] Description The product rear door is open. Recommended action If the error persists, turn the power off and then on. Resend the print job. Close the door. A print cartridge shipping lock is Be sure that the print cartridge installed. shipping lock has been removed. A print cartridge shipping lock is installed on one or more print cartridges. Be sure that each print cartridge shipping lock has been removed. The two shipping locks have not Open the rear door and remove been removed from the rear the shipping locks. roller. The print cartridge has reached the end of life. Replace the cartridge. See Replace print cartridges on page 82. The Print quality menu item Replace supplies is set to Override out. You can continue printing until you notice a decrease in print quality. See System setup menu on page 11. The product has detected print media in the tray that does not match the configuration for the tray. Load the correct media into the tray, or configure the tray for the size that you have loaded. See Load paper and print media on page 50. A used print cartridge was detected and accepted. No action necessary. Used print cartridges are installed. No action necessary. A used print cartridge is installed. Press OK to continue. 100 Chapter 10 Solve problems ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

Control-panel message
Status alert
Description
Recommended action
If the error persists, turn the
power off and then on. Resend
the print job.
Rear Door open
The product rear door is open.
Close the door.
Remove shipping locks from
<color> cartridge
A print cartridge shipping lock is
installed.
Be sure that the print cartridge
shipping lock has been removed.
Remove shipping locks from
all cartridges
A print cartridge shipping lock is
installed on one or more print
cartridges.
Be sure that each print cartridge
shipping lock has been removed.
Remove shipping material
from rear door
The two shipping locks have not
been removed from the rear
roller.
Open the rear door and remove
the shipping locks.
Replace <color> cartridge
The print cartridge has reached
the end of life.
Replace the cartridge. See
Replace print cartridges
on page
82
.
Replace supply
Override in use
The
Print quality
menu item
Replace supplies
is set to
Override out
.
You can continue printing until
you notice a decrease in print
quality.
See
System setup menu
on page
11
.
Unexpected size in tray #
Load [size] Press [OK]
The product has detected print
media in the tray that does not
match the configuration for the
tray.
Load the correct media into the
tray, or configure the tray for the
size that you have loaded. See
Load paper and print media
on page
50
.
Used <color> Cartridge in use
A used print cartridge was
detected and accepted.
No action necessary.
Used supplies in use
Used print cartridges are
installed.
No action necessary.
Used supply installed
To accept Press [OK]
A used print cartridge is installed.
Press
OK
to continue.
100
Chapter 10
Solve problems
ENWW