HP Color LaserJet Enterprise MFP M776 User Guide - Page 286
Table 9-8, Color plane registrations defects color models only, Fixing/fuser defects
View all HP Color LaserJet Enterprise MFP M776 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
Table 9-8 Color plane registrations defects (color models only) Sample Description Possible solutions One or more color plane(s) is not aligned with the other color planes. This registration 1. error will typically occur with yellow. 2. Reprint the document. From the printer control panel, calibrate the printer. 3. If a cartridge has reached a Very Low state, or the printed output is severely faded, replace the cartridge. 4. From the printer control panel use the Restore Calibration feature to reset the printer's calibration settings to the factory defaults. 5. If the issue persists, go to support.hp.com. Table 9-9 Fixing/fuser defects Sample Description Slight shadows or offsets of the image are repeated down the page. The repeated image might fade with each recurrence. Possible solutions 1. Reprint the document. 2. Check the paper type in the paper tray and adjust the printer settings to match. If necessary, select a lighter paper type. 3. If the issue persists, go to support.hp.com. Toner rubs off along either edge of the page. This defect is more common at the 1. edges of high-coverage jobs, and on light media types, but can occur anywhere on the 2. page. Reprint the document. Check the paper type in the paper tray and adjust the printer settings to match. If necessary, select a heavier paper type. 3. Enterprise models only: From the printer control panel, go to the Edgeto-Edge menu and then select Normal. Reprint the document. 4. Enterprise models only: From the printer control panel, select Auto Include Margins and then reprint the document. 5. If the issue persists, go to support.hp.com. 272 Chapter 9 Solve problems ENWW