HP Deskjet 3510 User Guide - Page 10

Get to know the HP Deskjet 3510 series Chapter 2 Light behavior Off On On button light Light behavior Off Pulsing Fast blinking Blinking steadily On Solution ePrint is disabled. Press ePrint button to access ePrint menu on the printer display. ePrint is on and connected. Solution The device is powered off. Indicates the device is in sleep mode. The device automatically enters sleep mode after 5 minutes of inactivity. Error has occurred. Refer to messages on printer display. The printer is printing, scanning, or copying. Printer is on and ready to print. Auto Power-Off Auto Power-Off is automatically enabled by default when you turn on the printer. When Auto Power-Off is enabled, the printer automatically turns off after 2 hours of inactivity to help reduce energy use. Auto Power-Off is automatically disabled when the printer establishes a wireless or Ethernet (if supported) network connection. You can change the Auto Power-Off setting from the control panel. Once you change the setting, the printer maintains the setting. Auto Power-Off turns the printer off completely, so you must use the On button to turn the printer back on. To change Auto Power-Off setting 1. From the Control Panel home screen, which displays Copy, Scan, and Quick Forms, select Settings. NOTE: If you do not see the home screen, press the Back button until you can see it. 2. From the Settings menu on the printer display, select Preferences. 3. From the Preferences menu, select Auto-Off. 4. From the Auto-Off menu, select On or Off, and then press Continue to confirm the setting. TIP: If you are printing over a wireless or Ethernet connected network, Auto Power-Off should be disabled to ensure that print jobs do not get lost. Even when Auto Power-Off is disabled, the printer enters Sleep mode after 5 minutes of inactivity to help reduce energy use. 8 Get to know the HP Deskjet 3510 series