HP Deskjet 6980 Network Guide - Page 21

Action: Your access point allows only a limited amount of time for you to complete the setup. Start the setup process again and make sure to complete the setup in the time allowed. ● Error message: More than 1 SecureEasySetup access point found Action: Someone else in the vicinity is also using SecureEasySetup to set up a device. Cancel the setup and start over. ● Error message: Another device connected to the access point before the device tried connecting. Action: Another device in the vicinity connected to your access point before the printer was able to connect. Cancel the setup and start over. ● Error message: Low signal Action: The access point is too far away or there is interference. In order to establish a good signal between the printer and access point, you might have to experiment a bit. Assuming the equipment is functioning properly, try doing the following things separately or in combination: - If there is a long distance between the computer or access point and the printer, move them closer. - If a cordless telephone, microwave, or other device that emits radio signals transmitting at 2.4 GHz is nearby, move it farther away to reduce radio interference. Network Guide 19