HP ENVY 14-3010nr HP ENVY14 SPECTRE Maintenance and Service Guide IMPORTANT! T - Page 45

NFC board, Remove the two Phillips PM2.0×3.0 screws

Get HP ENVY 14-3010nr PDF manuals and user guides View all HP ENVY 14-3010nr manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

NFC board Description Spare part number NFC board 675510-001 NOTE: The NFC board spare part kit does not include the NFC board cable. The NFC board cable is included in the Cable Kit, spare part number 672006-001. Before removing the NFC board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 32). Remove the NFC board: 1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the NFC board to the system board. 2. Turn the NFC board upside down, with the zero insertion force (ZIF) connector and cable toward you. Component replacement procedures 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
NFC board
Description
Spare part number
NFC board
675510-001
NOTE:
The NFC board spare part kit does not include the NFC board cable. The NFC board cable is included in the Cable
Kit, spare part number 672006-001.
Before removing the NFC board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
32
).
Remove the NFC board:
1.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the NFC board to the system board.
2.
Turn the NFC board upside down, with the zero insertion force (ZIF) connector and cable
toward you.
Component replacement procedures
37