HP ENVY 14-j000 ENVY Notebook model numbers used: 14-j000 through 14-j099 Main - Page 58

RJ45 cover, Reverse this procedure to install the fan.

Get HP ENVY 14-j000 PDF manuals and user guides View all HP ENVY 14-j000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

7. Remove the fan. NOTE: Steps 8 through 10 apply to computer models equipped with a graphics subsystem with UMA memory. See steps 2 through 7 for fan removal steps for computer models equipped with a graphics subsystem with discrete memory. 8. Disconnect the fan cable (1) from the system board. 9. Remove the three Phillips PM2.5×4.4 screws (2) that secure the fan to the top cover. 10. Remove the fan (3). Reverse this procedure to install the fan. RJ45 cover Description RJ45 cover Spare part number 818114-001 Before removing the RJ45 cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 27). Remove the RJ45 cover: 1. Disconnect the battery cable from the system board. 48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
7.
Remove the fan.
NOTE:
Steps 8 through 10 apply to computer models equipped with a graphics subsystem with UMA
memory. See steps 2 through 7 for fan removal steps for computer models equipped with a graphics
subsystem with discrete memory.
8.
Disconnect the fan cable
(1)
from the system board.
9.
Remove the three Phillips PM2.5×4.4 screws
(2)
that secure the fan to the top cover.
10.
Remove the fan
(3)
.
Reverse this procedure to install the fan.
RJ45 cover
Description
Spare part number
RJ45 cover
818114-001
Before removing the RJ45 cover, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
27
).
Remove the RJ45 cover:
1.
Disconnect the battery cable from the system board.
48
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts