HP ENVY 14-j000 ENVY Notebook model numbers used: 14-j000 through 14-j099 Main - Page 75

CAUTION, from the display panel.

Get HP ENVY 14-j000 PDF manuals and user guides View all HP ENVY 14-j000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

9. If it is necessary to replace the display panel: a. Remove the display bezel. b. Remove the four Phillips PM2.0×3.3 screws that secure the display panel to the display back cover. CAUTION: Before turning the display panel upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel. c. Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in front of the display back cover. d. Release the adhesive strip (2) that secures the display panel cable connector to the display panel. e. Disconnect the display panel cable (3) from the display panel. The display bezel is available using spare part numbers 818124-001 (14.0-in, FHD, WLED, AntiGlare (1920×1080), slim (3.0-mm), SVA eDP 1.2) and 818123-001 (14.0-in, HD, WLED, AntiGlare (1366×768), flat (3.6-mm), SVA eDP 1.2). Component replacement procedures 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
9.
If it is necessary to replace the display panel:
a.
Remove the display bezel.
b.
Remove the four Phillips PM2.0×3.3 screws that secure the display panel to the display back cover.
CAUTION:
Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
c.
Lift the top edge of the display panel
(1)
and swing it up and forward until it rests upside down in
front of the display back cover.
d.
Release the adhesive strip
(2)
that secures the display panel cable connector to the display panel.
e.
Disconnect the display panel cable
(3)
from the display panel.
The display bezel is available using spare part numbers 818124-001 (14.0-in, FHD, WLED,
AntiGlare (1920×1080), slim (3.0-mm), SVA eDP 1.2) and 818123-001 (14.0-in, HD, WLED,
AntiGlare (1366×768), flat (3.6-mm), SVA eDP 1.2).
Component replacement procedures
65