HP ENVY 15-ah100 Maintenance and Service Guide - Page 54
Hard drive, Remove the bottom cover see
View all HP ENVY 15-ah100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket or hard drive connector cable. The hard drive bracket and screws are included in the Hard Drive Hardware Kit, spare part number 812686-001. The hard drive cable is available using spare part number 812697-001. Description Hard drive, 2.0-TB, 5400-rpm, 9.5-mm Hard drive, 1.0-TB, 5400-rpm, 9.5-mm Hard drive, 750-GB, 5400-rpm, 9.5-mm Hard Drive Hardware Kit (includes bracket and screws) Hard drive cable Spare part number 801808-001 833907-005 778190-005 812686-001 812697-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 44). Remove the hard drive: 1. Disconnect the hard drive cable from the system board (1). 2. Remove the four Phillips PM2.5×3.0 screws (2) that secure the hard drive assembly to the computer. 46 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts