HP ENVY 15-ah100 Maintenance and Service Guide - Page 76
Power connector cable, Remove the Phillips PM2.5×4.0 screw
View all HP ENVY 15-ah100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Power connector cable Description Power connector cable (includes bracket) Spare part number 812681-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 44). 6. Remove the hard drive (see Hard drive on page 46). 7. Remove the speakers (see Speakers (front) on page 48). 8. Remove the system board (see System board on page 55). 9. Remove the display (see Display assembly - touch screen on page 57). Remove the power connector cable: 1. Remove the Phillips PM2.5×4.0 screw (1) that secures the power connector bracket to the computer. 2. Lift the bracket from atop the power connector (2). 3. Remove the power connector (3) from the computer. Reverse this procedure to install the power connector cable. 68 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts