HP ENVY 15-ah100 Maintenance and Service Guide - Page 72
Remove the bezel trim by removing the two broadhead Phillips PM2.0×2.4 screws, Disconnect the cable
View all HP ENVY 15-ah100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
e. Remove the bezel trim by removing the two broadhead Phillips PM2.0×2.4 screws (1), and then sliding the trim away from the bezel (2). 2. To remove the webcam/microphone module: a. Position the display assembly with access to the top edge. b. Lift the webcam/microphone module enough to gain access to the connector (1). (The module is attached to the display enclosure with double-sided tape.) c. Disconnect the cable (2) from the module. 64 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
e.
Remove the bezel trim by removing the two broadhead Phillips PM2.0×2.4 screws
(1)
, and then
sliding the trim away from the bezel
(2)
.
2.
To remove the webcam/microphone module:
a.
Position the display assembly with access to the top edge.
b.
Lift the webcam/microphone module enough to gain access to the connector
(1)
. (The module is
attached to the display enclosure with double-sided tape.)
c.
Disconnect the cable
(2)
from the module.
64
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts